Chibi G1 Optimus Prime 3D Printer Model
The file 'Chibi G1 Optimus Prime 3D Printer Model' is (stl,pdf) file type, size is 4.2MB.
The file 'Chibi G1 Optimus Prime 3D Printer Model' is (stl,pdf) file type, size is 4.2MB.
Chibi G1 Optimus Prime inspired by the D-Style Optimus from kotobukiya. Fully articulated and includes battle axe and ion blaster. This build will require super glue for certain pieces and sandpaper. Instructions included above. Enjoy!
| Final_Abs.stl | 20.6KB | |
| Final_Arm_Back.stl | 21.6KB | |
| Final_Arm_Front.stl | 57.6KB | |
| Final_Arm_Socket_Left.stl | 518.1KB | |
| Final_Arm_Socket_Right.stl | 518.1KB | |
| Final_Axe_Bottom.stl | 1.2MB | |
| Final_Axe_Shaft_Left.stl | 99.6KB | |
| Final_Axe_Shaft_Right.stl | 99.6KB | |
| Final_Backpack.stl | 22.2KB | |
| Final_Back_Part_Left.stl | 23.4KB | |
| Final_Back_Part_Right.stl | 23.4KB | |
| Final_Bicep_Back_Left.stl | 44.3KB | |
| Final_Bicep_Back_Right.stl | 44.3KB | |
| Final_Bicep_Front_Left.stl | 70.4KB | |
| Final_Bicep_Front_Right.stl | 70.4KB | |
| Final_Body_Lower.stl | 93.9KB | |
| Final_Body_Peg.stl | 684.0B | |
| Final_Body_Top.stl | 102.0KB | |
| Final_Crest.stl | 3.6KB | |
| Final_Ear.stl | 1.1KB | |
| Final_Ear_Cap.stl | 75.5KB | |
| Final_Ear_Peg.stl | 36.7KB | |
| Final_Eyes.stl | 2.0KB | |
| Final_Face.stl | 73.9KB | |
| Final_Foot_Left.stl | 16.9KB | |
| Final_Foot_Pin.stl | 1.0MB | |
| Final_Foot_Right.stl | 16.9KB | |
| Final_Gas_Tank.stl | 5.2KB | |
| Final_Grill.stl | 8.7KB | |
| Final_Gun.stl | 225.8KB | |
| Final_Helmet.stl | 784.9KB | |
| Final_Knee_Joint.stl | 44.0KB | |
| Final_Knee_Joint_Connector.stl | 88.9KB | |
| Final_Knee_Joint_Half.stl | 36.3KB | |
| Final_Knee_Left.stl | 272.2KB | |
| Final_Knee_Pin.stl | 1.4KB | |
| Final_Knee_Right.stl | 272.2KB | |
| Final_Left_Hand.stl | 257.9KB | |
| Final_Left_Window.stl | 25.7KB | |
| Final_Lower_Bicep.stl | 91.6KB | |
| Final_Mask.stl | 265.3KB | |
| Final_Matrix.stl | 1.4MB | |
| Final_Matrix_Holder.stl | 25.9KB | |
| Final_Neck.stl | 44.0KB | |
| Final_Neck_Peg.stl | 1.1MB | |
| Final_Right_Hand.stl | 257.9KB | |
| Final_Right_Window.stl | 25.7KB | |
| Final_Shoulder_Hinge.stl | 72.6KB | |
| Final_Shoulder_Peg.stl | 911.2KB | |
| Final_Side_Piece_Left.stl | 2.2KB | |
| Final_Side_Piece_Right.stl | 2.2KB | |
| Final_Smokestack.stl | 81.5KB | |
| Final_Thigh_Connector.stl | 115.5KB | |
| Final_Thigh_Joint_Back_Left.stl | 170.5KB | |
| Final_Thigh_Joint_Back_Right.stl | 170.5KB | |
| Final_Thigh_Joint_Left.stl | 144.4KB | |
| Final_Thigh_Joint_Right.stl | 144.4KB | |
| Final_Thigh_Left.stl | 35.4KB | |
| Final_Thigh_Right.stl | 35.4KB | |
| Final_Waist.stl | 10.2KB | |
| Final_Waist_Joint_Back.stl | 4.0KB | |
| Final_Waist_Joint_Front.stl | 30.0KB | |
| Final_Waist_Joint_Middle.stl | 52.4KB | |
| Final_Window_Frame_Left.stl | 195.9KB | |
| Final_Window_Frame_Right.stl | 195.9KB | |
| Final_Window_Hinge.stl | 77.3KB | |
| Optimus_Prime_Instructions.pdf | 1.1MB |
