Cherry MX Board 3.0 Keycaps 3D Printer Model
The file 'Cherry MX Board 3.0 Keycaps 3D Printer Model' is (stl) file type, size is 788.1KB.
The file 'Cherry MX Board 3.0 Keycaps 3D Printer Model' is (stl) file type, size is 788.1KB.
Some Keycaps for the original Cherry MX Board 3.0 (not the S version).
Letter/Number keys, left shift/CTRL, TAB and the spacebar to mark your average FPS layout or whatever else you might want to do with them.
Supercell's keycaps happened to have almost same dimensions and angles when I reduced their height as the original ones, so I used them as a basis.
I cut off the the angled part, made it smaller and combined everything again. For the left Shift/CTRL keycap I only widened it and that happened to fit pretty well. The spacebar was my own creation - I used the Keycap customizer for the upper angled part and added the base in Tinkercad.
These are not 100% perfect recreations but they are about 95% there - good enough for government work.
For the best result I recommend printing these on the side with a brim at 0.1mm layer height and supports enabled.
Updates: Added options with serrations:
Version 1 serrations are pretty close together.
Version 2 has the serrations further apart - horizontal and vertical lines have the same width - probably well suited for a resin printer.
Version 3 has wider horizontal lines which should make the horizontal and vertical lines more equal in actuality when printed with an FDM printer. These are the ones you see in the screenshots.
| Cherry_MX_Board_3.0_Keycap.stl | 132.2KB | |
| Cherry_MX_Board_3.0_Keycap_+_hor+ver_serrations_V1.stl | 397.9KB | |
| Cherry_MX_Board_3.0_Keycap_+_hor+ver_serrations_V2.stl | 257.6KB | |
| Cherry_MX_Board_3.0_Keycap_+_hor+ver_serrations_V3.stl | 258.7KB | |
| Cherry_MX_Board_3.0_Keycap_+_hor_serrations_V1.stl | 261.6KB | |
| Cherry_MX_Board_3.0_Keycap_+_hor_serrations_V2.stl | 205.9KB | |
| Cherry_MX_Board_3.0_Keycap_+_hor_serrations_V3.stl | 205.3KB | |
| Cherry_MX_Board_3.0_Keycap_+_ver_serrations_V1.stl | 164.2KB | |
| Cherry_MX_Board_3.0_Keycap_+_ver_serrations_V2.stl | 152.5KB | |
| Cherry_MX_Board_3.0_L-shift_Keycap.stl | 135.1KB | |
| Cherry_MX_Board_3.0_Spacebar_Keycap.stl | 198.5KB | |
| Cherry_MX_Board_3.0_TAB_Keycap.stl | 132.1KB |
