This is Cherry, a 60€-3D-Printer.
Buildsize: 10x10x10cm
Speed. 20mm/s
Resolution: 0.2mm (tested)
If you want to find out more about this printer, please visit my instructables site
| Hotend_clamp.stl | 79.3KB | |
| Hotend_e3d_v6.stl | 105.8KB | |
| Motor.stl | 171.7KB | |
| X-End.stl | 110.2KB | |
| X_-_Carriage.stl | 191.7KB | |
| Y-End.stl | 44.6KB | |
| Z-Motor.stl | 138.1KB |
