Chassis Brace For Arrma Senton, Big Rock And Granite 3D Printer Model
The file 'Chassis Brace For Arrma Senton, Big Rock And Granite 3D Printer Model' is (stl) file type, size is 3.7KB.
The file 'Chassis Brace For Arrma Senton, Big Rock And Granite 3D Printer Model' is (stl) file type, size is 3.7KB.
UPDATE: Use TPU with strong infill and wall settings for better durability as PETG has cracked under impact.
A simple chassis brace for the Senton, Big Rock and granite. They are designed to receive a 1/4 inch thick rod which is cut to size for your respective vehicle, and no worries if you cut a little too much cause you can add shims or set screws if you need! These have greatly stiffened my chassis lengthwise.
These will be a tight fit so be patient when installing them. I put the 3d printed parts onto the body mounts first, then connected them together with the metal rod, and then put the whole assembly back onto the truck. To seat the body posts back in all the way I tapped the middle of the body mounts with a hammer lightly till they were right where they needed to be.
| Chassis_Brace2.stl | 19.0KB |
