Chassis Brace For 1/8 Infraction And Vorteks 3D Printer Model
The file 'Chassis Brace For 1/8 Infraction And Vorteks 3D Printer Model' is (stl) file type, size is 3.0KB.
The file 'Chassis Brace For 1/8 Infraction And Vorteks 3D Printer Model' is (stl) file type, size is 3.0KB.
UPDATE: Use TPU with strong infill and wall settings for better durability as PETG has cracked under impact.
A simple chassis brace for the Arrma 1/8 Infraction and 1/10 Vorteks (Possibly also the 3s/2s Typhon but idk for sure) They are designed to receive a 1/4 inch thick rod which is cut to size for your respective vehicle, and no worries if you cut a little too much cause you can add shims or set screws if you need! These have greatly stiffened my chassis lengthwise.
| Chassis_Brace.stl | 14.7KB |
