About

That's my charr druid from Guild Wars 2. Model fits within 10x10x10 cm bounding box and, comes in multiple parts and is hollow in order to allow for installing a LED at the end of the staff.

/inspect

• Rubicon hat with shroud removed and some liberties taken
• Rubicon shoulders with mad liberties taken
• Spearmarshall chest
• Spearmarshall glove

• Rubicon boots

• Dark asuran staff

Base is custom.

Notes regarding LEDs

Staff fits a 0806 (2x1.6mm LED). In order to ensure sufficient thickness, the staff has a wire groove facing the ground instead of being hollow. The rest of the mini is hollow in order to allow you to run copper enameled wire hidden from the prying eyes of the observers. 0.2mm is sufficient to run the LED.

Base has a hole for USB type C female plug. If memory serves me right, the hole is significantly wider than the type C plug — you will need some greenstuff to fill it. Some filing may be required to fit the type C plug into that hole.

LEDs will typically require a 100-150Ω resistor if you intend to power it off your standard USB port.

The collection also includes terminals for optic fiber, if you wish to have the same kind of lightning effects as on the photo. Terminal fits a standard 0806 LED on the back, and has a round hole on the front. The hole is wide enough to fit a handful of 0.1-0.25mm optic fibers. You really want the thinnest optic fiber you can get. If you install optic fibers, consider upping the resistor on the main LED. Staff will shine significantly wider than the fibers.