Charau Ka Warrior 3D Printer Model
The file 'Charau Ka Warrior 3D Printer Model' is (stl) file type, size is 4.9MB.
The file 'Charau Ka Warrior 3D Printer Model' is (stl) file type, size is 4.9MB.
I've been playing Pathfinder recently and have started running the Age of Ashes adventure. Some quick searching didn't turn up any models that I wanted to print for the Charau Ka in the story (they're mandrill-like monkey people), so I made one!
I maybe got a little ambitious with the pose, as it requires a lot of support… but also, I really like how dynamic the pose is! I did what I could to maintain the pose while limiting the required supports and at least was able to get it to a place where the supports are pretty straight-forward to remove (I printed out 6 of them and managed to do it without snapping anything off the model).
As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!
| Charau_Ka_Warrior.stl | 9.0MB |
![Evil Scientist – [GHOST CITY] 3D Printer Model](https://cdn.3axis.co/assets/88/9d/3c/e4/889d3ce4-bf76-4b12-a9d2-7e45a38b6f60/images/06f55b50-e669-4337-a04b-f3048fff2884_thumb.jpg)
