Chain Link Gridfinity Bins (Single Unit) 3D Printer Model
The file 'Chain Link Gridfinity Bins (Single Unit) 3D Printer Model' is (stl) file type, size is 42.3MB.
The file 'Chain Link Gridfinity Bins (Single Unit) 3D Printer Model' is (stl) file type, size is 42.3MB.
These single unit “chain link” bins are compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . They come in four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm
See here for video: https://youtu.be/CK3MwY4R9zw
See here for stable downloads:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280
Chain Link Gridfinity Bin 100mm: https://social.thangs.com/m/664302
The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . Note that these chain link boxes do not stack.
Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.
Other sizes also available:
1x2 bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031
Chain Link Gridfinity Bin 1x2 100mm: https://social.thangs.com/m/688034
2x2 bins:
Chain Link Gridfinity Bin 2x2 20mm: https://social.thangs.com/m/714038
Chain Link Gridfinity Bin 2x2 40mm: https://social.thangs.com/m/714060
Chain Link Gridfinity Bin 2x2 60mm: https://social.thangs.com/m/714082
Chain Link Gridfinity Bin 2x2 80mm: https://social.thangs.com/m/714105
| Chain_Link_Gridfinity_Bin_100mm.stl | 32.7MB | |
| Chain_Link_Gridfinity_Bin_40mm.stl | 12.9MB | |
| Chain_Link_Gridfinity_Bin_60mm.stl | 19.5MB | |
| Chain_Link_Gridfinity_Bin_80mm.stl | 26.1MB |
