Boeing CH-47 Chinook

The Boeing CH-47 Chinook is an American twin-engined, tandem rotor, heavy-lift helicopter developed by American rotorcraft company Vertol and manufactured by Boeing Vertol. The work had begun in 1957 en had it's first flight in 1961.

The Chinook possesses several means of loading various cargoes, including multiple doors across the fuselage, a wide loading ramp located at the rear of the fuselage and a total of three external ventral cargo hooks to carry underslung loads. Capable of a top speed of 170 knots (200 mph; 310 km/h), upon its introduction to service in 1962, the helicopter was considerably faster than contemporary 1960s utility helicopters and attack helicopters. It remains one of the few aircraft to be developed during the early 1960s that has remained in both production and frontline service for over 50 years.

Wikipedia

The print

I have included 8 files.The first file is the kit card itself. None of the main body has a loop, maybe that will come later. Luckily the Chinook has 4 wheels so it can balance!
Main body. Print 1x
Side body. Print 1x
Side body mirror. Print 1x
Side small body. Print 1x
Side small body mirror. Print 1x
Rotor fixed/spinning. Choose if you want the rotor to be fixed or spinnging. Print 2x

Important!
To make sure the bodies stick close together, print with the option in Cura called ironing. I dont know if other slicers have a likewise option. For me this made the best results.

More designs

Let me know what you think of it! I really appreciate if you have any tips or suggestions for me. If you like this design check my profile for more and make sure you check Nakozen his profile for more designs!