Spin your 510 cartridges!
Print and drive a ~3mm drill bit into the center.
Warm carts up with a hair dryer to speed up the process.
Pictures are of a failed print, it works without the top but sometimes flings cartridges. I've uploaded more and less open variants, for more and less brave people.
Good luck have fun!
| fuge1.0byPatrickSapinski.scad | 542.0B | |
| fuge1.0byPatrickSapinski.stl | 21.2KB | |
| fuge_open1.0byPatrickSapinski.scad | 542.0B | |
| fuge_open1.0byPatrickSapinski.stl | 21.2KB |
