Designed in solidworks and printed on Ultimaker Original
https://www.youtube.com/watch?v=IkQFqTHpGO0
You need :
-3 bearings 11x5x5
-1 608 bearing
-130 motor 5v
-cellphone battery
-LM2596 voltage regulator
-TP4056 charger module
Edit: add the belt , you can print with filaflex
| Arceau.STL | 1.6MB | |
| Axe.STL | 14.5KB | |
| axeroue.STL | 7.9KB | |
| axevolant.STL | 26.7KB | |
| bascapot.STL | 64.1KB | |
| belt.STL | 66.1KB | |
| bloc608.STL | 675.3KB | |
| capot.STL | 57.7KB | |
| capotcoffre.STL | 2.2KB | |
| couronne.STL | 2.7MB | |
| demipied.STL | 12.2KB | |
| enjoliveur.STL | 1.0MB | |
| entretoise.SLDPRT | 63.1KB | |
| entretoise.STL | 58.3KB | |
| mixer.STL | 175.3KB | |
| moteur_capot.STL | 29.0KB | |
| patin.STL | 824.0KB | |
| piedV.STL | 39.3KB | |
| piedVSupport.STL | 50.2KB | |
| pignon.STL | 3.8MB | |
| pignonpoulie.STL | 97.7KB | |
| pneu.STL | 2.5MB | |
| poulie.STL | 1.2MB | |
| support608.STL | 94.2KB | |
| supportmoteur.STL | 32.1KB | |
| tonneau1.STL | 598.9KB | |
| tonneau2.STL | 995.4KB | |
| volant.STL | 1.7MB |
