Thank you to FP-Creator for the nice ring.
I used it to make this celtic storage cylinders/boxes. There are six different sizes and additional three sizes stackable.
There is a simple lid too.
The same design, "waterproof" and stronger with a inner wall, can found here: https://www.thingiverse.com/thing:3328692 All versions have the same size. If you scale it by the same factor you can mix it, particular the stackable ones.
Not sure if the cylinders are printable without support. (depends on the scaling and so on) The lid and the stackable versions will need support (at the bottom). If you downscale it check it in the slicer before printing!
(The first image is only as summary and not for printing.)
If you want to create your own lid (at the current scale) create a cylinder 88x5mm (for the hole which is 89 diameter) and a cylinder 94-96mm diameter for the top of the lid.
I did not test or print it yet and remixed it just for fun.
Update: I add the size 1-3 in a stackable version.
Update: There is a cat lid too: https://www.thingiverse.com/thing:3334035
Update: I made the stronger version, see https://www.thingiverse.com/make:590402 I scaled it to 120% and cylinder and lid fits perfect, so I am not sure on 100% scale it fits perfect too. In 100% there is a 0.5mm gap between, each side. This means the stackable too. Maybe print a test first.
celtic_knot_storage_cylinder_-_lid.stl | 4.4MB | |
celtic_knot_storage_cylinder_without_walls_-_size_1.stl | 2.5MB | |
celtic_knot_storage_cylinder_without_walls_-_size_1_-_stackable.stl | 2.4MB | |
celtic_knot_storage_cylinder_without_walls_-_size_2.stl | 6.4MB | |
celtic_knot_storage_cylinder_without_walls_-_size_2_-_stackable.stl | 5.8MB | |
celtic_knot_storage_cylinder_without_walls_-_size_3.stl | 10.3MB | |
celtic_knot_storage_cylinder_without_walls_-_size_3_-_stackable.stl | 9.2MB | |
celtic_knot_storage_cylinder_without_walls_-_size_4.stl | 14.2MB | |
celtic_knot_storage_cylinder_without_walls_-_size_5.stl | 18.0MB | |
celtic_knot_storage_cylinder_without_walls_-_size_6.stl | 21.8MB | |
example_-_not_for_printing.stl | 13.5MB |