I designed this phone stand for my Nokia 6 from scratch. There are 4 files here. One is just the plain stand, another has NOKIA 6 embedded, and the 3rd one has an opening for charger wires to pass through with small slots underneath. A 4th one "Nokia-Split" is a cut off for testing scaling without having to print the whole thing if printed for another phone, sized differently. My phone has a 5.5" screen and with the rubber case, it measures 3.21"Wide x 6.29 High or roughly 81.5mm x 160mm for you "Metric" types.
While it holds the phone upright, the cut-away on the middle can be used to mount the phone on landscape mode to watch videos. Also, the handle/support on the back enables mo to just pick it up when placing or receiving a call instead of having to pull the phone out of the stand, and use it as a phone handle. It could also be layered in colors for a cooler look, as shown on the pictures.
| NOKIA-6-WIRE.STL | 9.0MB | |
| NOKIA-6.STL | 9.1MB | |
| NOKIA-SPLIT.STL | 23.1KB | |
| NOKIA-STL-2.STL | 5.9MB |
