The file 'Ceiling Light TripleHex 23 3D Printer Model' is (stl,stp) file type, size is 1.1MB.
Simple ceiling light.
Assembly requires 6x magnet D5x5mm, 3 LED bulbs, 3 lamp sockets, 3x screwed pipes for sockets, 3x nut for the hollow screws, 2x connectors, hook from ceiling, cabels and 20cm of some cord.
1/ Glue the magnets to the main body and cover.
2/ Mount the sockets to the main body by nuts.
3/ Connect the sockets by cables in parallel scheme to the connectors.
4/ Screw in the bulbs.
5/ Connect cables with ceiling cables/wires for the light.
5/ Make a loop from cord and get it on hook (max 47mm from the ceiling).
6/ Tight it up from bottom and make some knots for safety.
7/ Cover knots by magnetic cover.
Voiala - new ceiling light!
Be safe! Always turn of electricity when you manipulate with wires!
krytka.stl | 213.9KB | |
lustr2.stl | 576.9KB | |
lustr_asm.stp | 145.5KB | |
objimka_zarovka.stl | 11.9MB |