CEE To Neutrik PowerCon True1 Adapter 3D Printer Model
The file 'CEE To Neutrik PowerCon True1 Adapter 3D Printer Model' is (3mf,blend,stl) file type, size is 402.6KB.
The file 'CEE To Neutrik PowerCon True1 Adapter 3D Printer Model' is (3mf,blend,stl) file type, size is 402.6KB.
This is an adapter from 16A CEE plug (the blue ones, known from campsites and construction) to the lovely weatherproof, rugged, reliable Powercon True1 connectors.
The design comes from an effort to have a travel-worthy charging setup for my electrical motorcycle that would also allow me to charge from the (EU-) ubiquitous blue CEE campsite plugs.
I ordered a cheap CEE plug from AliExpress (like this - affiliate, but easy to find otherwise) - and replaced the white bit with my design to fit a powercon E1025F socket like this (again affiliate and easy to find)
The design uses the original screws from the plug (or shorter ones? not sure now) and two 3mm inserts for the powercon, set in blind sockets to keep that part of the design waterproof.
| CEE_neutrik.3mf | 89.4KB | |
| CEE_neutrik.blend | 1.2MB | |
| CEE_neutrik.stl | 234.1KB |
