CDB- Common Drain Blaster 3D Printer Model
The file 'CDB- Common Drain Blaster 3D Printer Model' is (step,stl) file type, size is 942.4KB.
The file 'CDB- Common Drain Blaster 3D Printer Model' is (step,stl) file type, size is 942.4KB.
This converts one of the most commonly sold drain blasters to shooting foam projectiles. Features a top picatinny rail for optics, and a bottom rail for hand grips. A rear Nerf stock adapter to mount nerf compatible stocks. Finally, a twist barrel adapter to quickly change the type of ammo you want to fling into your opponents. Currently I only include a demolisher rocket barrel. A barrel adapter stl is included in the files if you want to create your own barrel attachment(Note that the barrel adapter end sticks 2mm out of the barrel as shown in the last picture).
Hardware required:
4x M3x16 bolts (For the Picatinny rails)
7x M3x20 bolts
11x M3 Nuts
Additional Notes:
There is some clearance around the nozzle. I printed a small TPU cap to put around the nozzle, You can use other preferred methods of sealing. Also assembling might be a bit tight, that does give the whole structure a bit more rigidity.
| CDB_-_Barrel_Adapter.step | 16.7KB | |
| CDB_-_Barrel_Adapter.stl | 78.2KB | |
| CDB_-_Barrel_Adapter_1_Mega_Dart.stl | 162.6KB | |
| CDB_-_Barrel_Adapter_1_Ultra_Darts.stl | 162.6KB | |
| CDB_-_Barrel_Adapter_Demolisher_rocket.stl | 626.6KB | |
| CDB_-_Barrel_Adapter_Single_Dart.stl | 106.3KB | |
| CDB_-_Bottom_Picatinny_Rail.stl | 124.5KB | |
| CDB_-_Front_Top_Piece.stl | 644.2KB | |
| CDB_-_Front__Bottom_Piece.stl | 567.7KB | |
| CDB_-_Rear_stock_adapter.stl | 247.4KB | |
| CDB_-_Top_Picatinny.stl | 197.0KB | |
| CDB_-_TPU_Nozzle_Seal.stl | 661.0KB |
