CATICORN!!!
The Toybox does this wonderfully. I did smooth out the neck-head transition so my other printer can do it as well. Did have some trouble w the horn in gold but may be a filament setting issue.
update 6/11/19: I noticed the tip of the horn and wings break off really easy so I adjusted it. The beefy wings file gives the wings more structure at the top (see the last 2 pictures, the white one has the new wings. The gold is original and the tips broke off).
the last file has a shorter rounded horn, I'm still trying to figure out the horn. It may be my printer having issues but it's not great. you can try heating up the end of the horn and molding it w your fingers if it's as bad as mine were.
Everything still works fine with the toybox though. Go figure.
update July 18 2019: Fixed the beefy wings round horn file, it was way wrong.
If difficulty w the horn printing two at a time works as each layer has a little time to cool as it shifts back and forth between the two on the last bit of the horn.
| Caticorn_beefy_wings.stl |
| Caticorn_beefy_wings_roundy_horn.stl |
| caticorn_ready.stl |
