Cath Lab Transluscent EKG Cable Manager 3D Printer Model
The file 'Cath Lab Transluscent EKG Cable Manager 3D Printer Model' is (stl) file type, size is 767.4KB.
The file 'Cath Lab Transluscent EKG Cable Manager 3D Printer Model' is (stl) file type, size is 767.4KB.
MacLab does not make a cable manager for EKG leads that are translucent. Using 3d slash and then Tinkercad I remixed these for 5 leads. At first I used superglue to hold the flat plate in place, but am remixing this only to provide four sets per print and to use a small 3mm screw to hold in place just in case a lead needs replacing. These work best if there is a snug fit for the wires closest to the patient side (it will need to be scaled down) and if printing regular size these keep the leads from bunching up and tangling when not in use. I use one small and one large for each set.
| 1659909.stl | 5.1MB | |
| cathlab_transluscent_ekg_cable_manager.stl | 886.7KB |
