Catan Water Tiles – Warcraft Inspired 3D Printer Model
The file 'Catan Water Tiles – Warcraft Inspired 3D Printer Model' is (stl) file type, size is 77.0MB.
The file 'Catan Water Tiles – Warcraft Inspired 3D Printer Model' is (stl) file type, size is 77.0MB.
This are the water pieces for the Catan board but designed after the Warcraft III figures. It can be a little tricky to differentiate the ports. The one that looks like a harbor and has stacks of three of all of the five resources is the 3 for 1 turn in. The other one that looks like two elevated huts that is surrounded by groups of two of a specific resource is the 2 for 1 turn in of that resource. Painting the pieces will make this easier to tell.
The full tiles are just for Seafarers
The long pieces were barely able to fit diagonally on my large print bed so depending on your printer you may need to make these in two pieces and then glue/acetone weld them together.
If you want to make this you will still need to buy the game to get the necessary cards and such. I made enough tiles for the 6 player version. If you only want the 4 player version you only need to make the 6 long pieces. I’ll be posting the other board tiles in different posts.
For the thief in order to tie in another Blizzard game I took this Diablo model and added a base.
http://www.thingiverse.com/thing:18364
For the number tiles I used these:
http://www.thingiverse.com/thing:40886
(you may want to print at 95%. Mine were a tight fit)
To learn more go to:
https://recklessrobbie.wordpress.com
| Water_All01.stl | 86.7MB | |
| Water_Brick+01.stl | 93.2MB | |
| Water_Full_Tile_+_Boat.stl | 3.7MB | |
| Water_Full_Tile_01.stl | 3.4MB | |
| Water_Full_Tile_02.stl | 3.6MB | |
| Water_Sheep+02.stl | 102.9MB | |
| Water_Small01.stl | 49.4MB | |
| Water_Small02.stl | 24.8MB | |
| Water_Small03.stl | 29.1MB | |
| Water_Stone01.stl | 71.5MB | |
| Water_Wheat01.stl | 62.6MB | |
| Water_Wood+01.stl | 89.1MB |
