Catan 2.0 Storage Box 3D Printer Model Free Download

Description Files (14)

Summary

I took inspiration from other designs especially this Catan 3D 2.0 Storage Case by lablabla but designed this system completely from scratch.

Some improvements and other intentional design elements:

Removable player token trays for use during game play
Resource card divider trays that separate cards by type and can be used during game play
Flat building cost cards that fit nicely in the box
Dedicated storage for robber/sandstorm token, longest road and largest army trophies
Dedicated number token & dice storage
Optimized hex storage slot height for easy sliding in and out without interfering with other pieces
Labeled hex storage slots grouped by resource type
Harbor/sea hexes are ordered (clockwise) to match board setup order

The hex storage files come in 2 versions:

Normal: Includes a hole for gluing in round, 8 mm x 3 mm magnets
Hidden magnets: Requires configuring your printer to pause 3.6 mm from the top of the print. (Print with magnet holes on the top) After pausing, you can drop in the round, 8 mm x 3 mm magnets and print the final layers over them to completely embed the magnets in the print. A dab of super glue doesn't hurt to prevent any slight rattling that can occur but is not required.

Make sure you orient the magnets the correct way so that the 2 hex storage halves connect properly.

Each file should be printed once with the following exceptions:

In addition to stl files, I've also included sketchup files as well as various source files (icons, etc) for easier modification.

I used the following icons:

box_bottom.stl	334.3KB
box_top.stl	401.4KB
building_costs_x4.stl	2.2MB
card_storage_a.stl	317.1KB
card_storage_b.stl	191.9KB
hex_storage_a.stl	1.7MB
hex_storage_a_hidden_magnets.stl	1.7MB
hex_storage_b.stl	1.7MB
hex_storage_b_hidden_magnets.stl	1.7MB
hex_storage_filler_a.stl	684.0B
hex_storage_filler_b.stl	684.0B
player_token_storage_x4.stl	46.0KB
sketchup.zip	6.6MB
source_files.zip	4.7MB