Tried and worked also without a support
Printed and aded another version with seperate smaller 15mm ball and the same big ball alone. I printed it with two 15mm balls in different colors printed first and put them on the cooling fan side of the extruder head when printing is about half done. There and then you have maximum space to add them between extruder head and the printing ball.
C'mon, let's play a game. Who can put the higher number of balls inside? I say 4 with no pausing the printing process.
After I unsucessfully tried to print three or more similar balls from here, I decided to make my own from a scratch. Tinkercad made, 45mm big ball (just to not go under the couch - 40mm is to small) with 20mm ball inside. 100% infill to add durability. Support only on bottom 6mm is needed to ensure sticking on the plate and to hold the inside ball which is modeled 0,5mm up in the air for easy removing. There is also a gcode, with my settings for PLA, from which I sucessfully printed four of those balls to time.
If you like my work, you can buy me a cofee or some fine creamy stout, anytime.
https://www.paypal.com/paypalme/kukibiker
| 15mmball.stl | 59.8KB | |
| cattoy.stl | 262.6KB | |
| cattoycompl.gcode | 3.1MB | |
| cattoycompl.stl | 370.1KB |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
