This is a utility blade holder that helps to cut strips of cardboard quickly and safely, to make cat scratching boards. You cut corrugated cardboard boxes into uniform strips, glue the strip together and let your cat 'rip'. I sprinkled some cat nip in to the glue, just to add some 'spice' to the mix
Print STL with 55 degree incline (as saved) to ensure blade slot is printed unobstructed
Slice with bed touching support
It is designed for standard trapezoidal utility blades, the screw is an M3 x 9
Use new sharp blades, and keep the blade clear of debris for best results
Cut from the straight edge of the cardboard first, as all subsequent cuts will follow the same path
Print STL with 55 degree incline (as saved) to ensure blade slot is printed cleanly
Slice with bed touching support
| Cat_Scratcher_Cardboard_Cutter_v2.stl | 295.7KB | |
| Cat_Scratcher_Cardboard_Cutter_v2_Left_Handed.stl | 290.3KB | |
| Thumb_Screw.stl | 118.2KB |
