Cat Lovers Dish 3D Printer Model
The file 'Cat Lovers Dish 3D Printer Model' is (stl) file type, size is 3.4MB.
The file 'Cat Lovers Dish 3D Printer Model' is (stl) file type, size is 3.4MB.
This should be printed with supports.
There are 3 versions:
CatHolder.stl - This is a deeper container and is better suited to being used as a container.
CatHolderShallow.stl - This is the same as the above file except the dish is shallower. Removing supports from under the feet and behind the legs is very tricky.
CatHolderShallow2.stl - This is same as the first shallow dish, except the feet have been bent into the holder so that supports are not generated behind the legs and can be more easily removed.
Update 23.05.24: I have printed the shallow dish and found that it prints much better with normal supports, rather than tree supports (I use Cura to generate supports). I would recommed that you check the layers carefully before saving your gcode file to ensure that the generated supports will actually provide support before you start printing.
The deeper dish prints well with tree supports.
Update 02.06.24: I have added a new stl file, "CatHolderShallow2.stl" which should be much easier to remove supports from as the back of the legs merge with the holder.
| CatHolder.stl | 2.7MB | |
| CatHolderShallow.stl | 2.6MB | |
| CatHolderShallow2.stl | 2.4MB |
