CAT FLAP 3000 3D Printer Model
The file 'CAT FLAP 3000 3D Printer Model' is (step,stl,pdf) file type, size is 2.7MB.
The file 'CAT FLAP 3000 3D Printer Model' is (step,stl,pdf) file type, size is 2.7MB.
Hi Cats,
i designed this 1,5 years ago and tested so far. 3D-prints combined with plywood. You can use it one sided (indoor with outdoor cover) or double-sided. If you use it on both sides, pay attention to the inside and outside plywood parts. You need one screw 3,5x10mm (spax) to mount the flap-in to the flap-out-frame.
The slot (1-2 mm) between the door and the tunnel on usual cat flaps is here closed with the flap-out-frame. No wind comes through here. The flap has a diameter of 9 mm (usually 2-3 mm). It keeps the temperature better.
I added a .step file in the directory to customize the tunnel length for house doors.
UPDATE 24.05.2020
Parts lock2020 and switch2020
Cat-Flap 3000 video https://youtu.be/3RXuSSjBK4w
| 3-D-SIGN_Cat-Flap_3000_v3.step | 3.1MB | |
| 3-D-SIGN_Cat-Flap_3000_v3.stl | 3.4MB | |
| clip.stl | 184.8KB | |
| drawing_01.pdf | 312.8KB | |
| flap_in.stl | 602.1KB | |
| flap_out.stl | 603.8KB | |
| lock.stl | 144.6KB | |
| lock2020.stl | 131.4KB | |
| one_side_outdoor-cover.stl | 266.7KB | |
| Ply_1.stl | 74.7KB | |
| Ply_1_outside.stl | 74.3KB | |
| Ply_2.stl | 87.6KB | |
| Ply_2_outside.stl | 75.5KB | |
| Ply_3.stl | 91.7KB | |
| Ply_3_outside.stl | 91.7KB | |
| Ply_4.stl | 94.0KB | |
| Ply_4_outside.stl | 94.0KB | |
| Ply_5.stl | 261.1KB | |
| Ply_5_outside.stl | 291.5KB | |
| switch.stl | 392.5KB | |
| switch2020.stl | 408.9KB | |
| Tunnel.stl | 49.5KB |
