3 different leg options. 3/8" tubing or dowel, cut 125 mm for shoe application
leg_shoe....30% 4.4.4.4 0:19 hr x 3
leg_hollow..10% 4.4.4.4 0:43 hr x 3
leg_full........10% 4.4.4.4 1:20 hr x 3
siloBottom..10% 4.4.4.4 3.52 hr x 1
bowl............10%.4.4.4.4 2:48 hr x 1
hinge...........30% 3.4.4.4 0:46 hr x 1
cover...........30% 4.4.4.4 1:35 hr x 1
spacer.........30% 4.4.4.4 0:14 hr x 1
siloTopCover & feed level indicator. used 1/2" dowel
cover.........30% 4.4.4.4 2:40 hr x 1
foot............30% 4.4.4.4 0:24 hr x 1
knob set....30% 4.4.4.4 0:35 hr x 1
PLA recommended, 3" ABS pipe for silo part, securing parts will make a more stable unit, attaching a string to the cover will make manual opening easier. Applying polyurethane or similar produce to the high use areas will make the print stronger.
Cover optional. I am working on a method to control the opening and closing of the cover to be able to control the amount of food available. .
The 3d community is welcome to provide a method to do this.
hinge remix; https://www.thingiverse.com/thing:1083876
4.5.2020 added reinforcing cap if bottom starts to delaminate.
| bowl.stl | 304.7KB | |
| bowlCover.stl | 148.0KB | |
| bowlHinge.stl | 150.1KB | |
| bowlHingeSpacer.stl | 136.8KB | |
| legFull.stl | 98.5KB | |
| legHollow.stl | 199.1KB | |
| legShoe.stl | 211.4KB | |
| reinforcingcap.stl | 39.7KB | |
| siloBottom.stl | 87.9KB | |
| siloCover.stl | 63.9KB | |
| siloCoverFoot.stl | 20.7KB | |
| siloCoverHandleSet.stl | 226.1KB |
