Inspired by jpod's great holder but rebuilt from scratch.
The problematic T-joiners have been replaced with separate pegs. The pegs come in a range of tolerances to suit your particular printer. Print one, try it then print a bigger or smaller one based on your results.
There are textured and untextured versions. I printed the textured ones at 0.25mm, they might look better at a lower layer height.
There is a sleeved version for to suit sleeves 45mm wide, 68mm long. I have not tested it.
A separate holder for the secrets expansion.
The existing cardboard pieces fit on top of the holders to help retain the pieces.
Print 1, 2, 3, 4, centre and a joiner (test size for size then try larger or smaller ones).
If you have a large printer print the "single piece models"
If you have sleeved cards print the sleeved version.
Solid STEP files included
20240527 - Secrets expansion added. Sleeved models made the same height. Single piece prints added
20191221 - Added Sleeved version, suit Sleeves 45mm wide, 68mm long
| CMKLS_EXAPANSION_Left.STL | 441.7KB | |
| CMKLS_EXAPANSION_Right.STL | 391.9KB | |
| CMKLS_EXAPANSION_SINGLE_PIECE.STEP | 4.6MB | |
| CMKLS_EXAPANSION_SINGLE_PIECE.STL | 690.1KB | |
| CMKL_01-02_SINGLE_PEICE.STL | 1.0MB | |
| CMKL_01-02_SINGLE_PIECE.STEP | 7.0MB | |
| CMKL_01.STL | 464.6KB | |
| CMKL_01_Textured.stl | 4.2MB | |
| CMKL_02.STL | 490.0KB | |
| CMKL_02_Textured.stl | 4.2MB | |
| CMKL_03-04_SINGLE_PIECE.STEP | 7.4MB | |
| CMKL_03-04_SINGLE_PIECE.STL | 1.1MB | |
| CMKL_03.STL | 577.0KB | |
| CMKL_03_Textured.stl | 4.5MB | |
| CMKL_04.STL | 420.5KB | |
| CMKL_04_Textured.stl | 4.9MB | |
| CMKL_1-2.STEP | 7.2MB | |
| CMKL_3-4.STEP | 7.6MB | |
| CMKL_Centre.STEP | 3.5MB | |
| CMKL_Centre.STL | 435.8KB | |
| CMKL_Centre_Textured.stl | 5.4MB | |
| CMKL_SLEEVED_1-2_ONE_PIECE.STL | 859.9KB | |
| CMKL_SLEEVED_1-2_SINGLE_PIECE.STEP | 7.7MB | |
| CMKL_SLEEVED_1.STL | 414.3KB | |
| CMKL_SLEEVED_2.STL | 807.8KB | |
| IMG_1247.HEIC | 2.1MB | |
| Joiner_Negative_0.1mm.STL | 3.6KB | |
| Joiner_Negative_0.2mm.STL | 3.6KB | |
| Joiner_Negative_0.3mm.STL | 3.6KB | |
| Joiner_Negative_0.4mm.STL | 3.6KB | |
| Joiner_Negative_0.5mm.STL | 3.6KB | |
| Joiner_Plus_0.1mm.STL | 3.4KB | |
| Joiner_Plus_0.2mm.STL | 3.4KB | |
| Joiner_Plus_0.5mm.STL | 3.4KB | |
| Joiner_Size_for_Size.STL | 3.4KB |
