Updated 1/10/2025 I fixed the lower lip of the Goods Tray to make removing the bottom good easier
Updated 9/24/24: I've tightened the fitment of the lids and deleted the mat roller end caps since they were less effective the tighter you rolled the mat.
Storage for Castles of Burgundy SE with acrylic tiles. My print bed is 225 x 225 so I tend to print things in smaller sizes, and I try to minimize the amount of material used which also helps reduce weight. Most of the trays are designed to be used as storage in the main box then pulled directly into play. The Mat rollers help to roll it up tight. I had to print the roller in two pieces, again due to my smaller printer. The pictures show how I store everything.
I print everything that has corners with mouse ears, and I printed the mat roller with a 5mm brim.
Thank you for looking! Please leave a like and any comments / suggestions. Thank you!
| CoB_Black_Market_tray.stl | 42.3KB | |
| CoB_Bonus_tiles_tray.stl | 75.8KB | |
| CoB_Dice_tray.stl | 18.7KB | |
| CoB_Goods_Tray.stl | 29.3KB | |
| CoB_Hex_Supply_tray.stl | 58.2KB | |
| CoB_Mat_roller.stl | 52.0KB | |
| CoB_Turn_order_tray.stl | 109.2KB | |
| CoB_Vine_Bonus_tiles.stl | 166.4KB | |
| CoB_Worker_Coin_tray.stl | 30.9KB |
