Full build video here: https://www.youtube.com/watch?v=DjhcxoObey0
New castle and wall pieces for the board game Castle Panic. Replaces those cardboard pieces with a real 3D Castle! Includes fire pieces and the Wizard's Tower for "The Wizards Tower" Expansion and a Keep for the "Engines of War" Expansion.
The base is used to keep everything together. It passes the bump test. Tower and wall pieces slide into the pegs on the base. No need for glue or magnets.
Parts List:
Base
Barricade
Flame Token
Fortification Token
Keep
Tower A (w/Window)
Tower B (no Window)
Wizard's Tower
Wall A (w/Door)
Wall B (no Door)
Printing:
Fortification should be the only piece that will need supports. I tried to make sure supports were used as little as possible when modeling these files.
I used 10% infill on everything but if you're able to, I'd recommend higher infill on the lower parts of the towers so that they don't tip over so easily. The pegs pretty much solve this but either way, they work better with heavier lower sections. Should be easy print jobs.
Filament:
CC3D - Silver used for the castle.
Ziro - Brown Used for the barricades and Fortification
Monoprice - High Gloss orange used for the Fire
| Barricade.stl | 2.0MB | |
| Base.stl | 901.2KB | |
| Flame.stl | 217.2KB | |
| Fortification.stl | 580.5KB | |
| Keep.stl | 691.6KB | |
| Tower_A_window.stl | 204.6KB | |
| Tower_B_noWindow.stl | 194.1KB | |
| Tower_Wizards_v14.stl | 254.1KB | |
| Wall_A.stl | 516.6KB | |
| Wall_B_noDoor.stl | 518.0KB |
