Castle MakerBot is my Entry into the BotBling competition! Hope you Like it!
Bot Bling Design Challenge by Carmiac: http://www.thingiverse.com/thing:7784
I decided to do a Castle theme. Included in Castle MakerBot are four turrets, several coat of arms, medieval wall torches, stained glass rose window, and runic keypad for the Gen4 interface. I also couldn't resist putting a dragon in there, but that is Tbuser's design.
Most of this was designed in OpenScad. Originally it was designed in Sketchup, but then I learned OpenScad and started over and redesigned everything. The only thing that remains in Sketchup is the stained glass window, but I will work on moving that to OpenScad as well.
If you wish to poke around in any of the OpenScad files, I highly recommend you check out the Coat of Arms. It is parametric and you have a choice of 7 different logos to be placed in 3 different positions. I have uploaded some renditions here.
The Torches are made from LED Tealights! They flicker kind of like real fire. These torches were difficult to photograph in low light, but I did the best I could.
The castle turrets snap right on to the rod end caps on a thing-o-matic.
The stained glass rose window has some pieces printed in blue PLA, natural PLA, red ABS and black ABS.
I have intentions to add a few more things to this, if I have the time. There is just so much more I want to do.
Hope ya like it!
Update... added this video of me showing the various parts of the castle. Focus is a little off on some of the close ups and the stills on the left probably do the project more justice. I recommend turning down the volume too, the only noises are me being clumsy and banging into things. I guess I should have talked through some of it, but it is getting late and it probably would have made the video worse than it is! ;P
| Coat-Of-Arms-MakerBot-Cupcake.stl | 202.3KB | |
| Coat-Of-Arms-MakerBot-ToM.stl | 192.4KB | |
| Coat-Of-Arms-MakerBot-Unicorn.stl | 201.3KB | |
| Coat-Of-Arms-RepRap-2.stl | 417.2KB | |
| Coat-Of-Arms-RepRap.stl | 353.9KB | |
| Coat-of-Arms-V3.scad | 29.0KB | |
| Glass-Blue.stl | 521.2KB | |
| glass-clear.stl | 85.8KB | |
| Glass-Frame.stl | 588.8KB | |
| Glass-red.stl | 149.9KB | |
| OSHW-Logo.dxf | 2.2KB | |
| RepRap.stl | 49.9KB | |
| Runic-Stickers.pdf | 4.2KB | |
| stained-glass-Final.skp | 710.9KB | |
| Torch-V2.scad | 932.0B | |
| Torch-V2.stl | 719.2KB | |
| Turret-V2.scad | 1.9KB | |
| Turret-V2.stl | 208.0KB | |
| Unicorn-Logo.dxf | 14.9KB |
