This is a remix of Castle Grayskull by DiMarzio.
Update 1 - Changed trap door to print with main castle. Also set angles around trap door so as to prevent supports from blocking slider.
Update 2 - Filled channel around rear portcullis decoration in main castle.
Update 3 - Posted redesigned main castle. Removed holes on inside of object. Enlarged the towers. Will update the tumbler inserts later tonight.
Update 4 - Removed old models and uploaded new. Made a ton of changes. Print in place trap door uses sword to open. Print in place draw bridge door. Added teeth to the front edge of the draw bridge door to prevent dice from rolling off. Had to increase the size so standard size D20 dice would fit. moved the holes in the towers toward the back of the model in order to increase the size of the holes into the center. Please let me know what problems come up if you print this version.
Update 5 - Found an issue with the trap door release mechanism. Added clearance.
| Greyskull-Dice_Tower.stl | 10.9MB | |
| Sword.stl | 2.2MB |
