Well, lately I'm messing hands with the issue of aluminum, practice makes perfect. It turns out that where I pour aluminum, (the mold inlet) sometimes left me a big mount of melt alu at end that does not feet into the melting pot to. Must be cut with the radial etc .. and is annoying for me.
To solve this problem, (I hope) I created this casting neck, it's just to make some good receivers aluminum necks, and then can be removed from a hammer.
I have also added the outer case, if someone does not have plastic glass, or wants the full mode .. I'm just using the part A
It is easy to cut and adapt it to put in the positions you need. Eventually you tell if it is useful or not xDD
PLEASE! do not use this or any other mine contribution to make money.
They are shared to enhance DIY.
Thank you
you want more designs?
Join the group and check out. bring your favorite designs!
@ http://www.thingiverse.com/groups/aluminium-pla-casting
If this thing was helpful or you like the designs, please click the "like" button. in that way I will continue sharing more things.
If you print one I would love to see it in the section "i made one"
of course, all views and advice are welcomed, you can always improve design..
thanks for watching
| casting_neck_A.stl | 22.9KB | |
| casting_neck_B.stl | 18.2KB | |
| casting_neck_c.stl | 18.2KB |
