Caster Base For Toy Organizer 3D Printer Model
The file 'Caster Base For Toy Organizer 3D Printer Model' is (stl) file type, size is 59.6KB.
The file 'Caster Base For Toy Organizer 3D Printer Model' is (stl) file type, size is 59.6KB.
I designed a caster base for the Humble Crew, Natural Wood/White Toy Organizer. To assemble the base, use M4 screws with a length of 10-12mm and corresponding M4 nuts. You will need 4 sets in total, requiring 16 pairs of screws and nuts.
Please note that the groove where the leg is inserted has a width of 15.4mm. Depending on your 3D printer, the fit may be too tight. It is recommended to print one piece first to check if it fits properly before proceeding with the full assembly.
This caster base is designed specifically for organizing and storing electronic components and is intended for adult use only. Please be aware that if used by children, there is a potential risk of the unit tipping over, especially if not properly secured. Ensure that this organizer is kept out of reach of young children and used in a safe environment.
| Caster_Base.stl | 352.6KB |
