05.08.2018 Added LongSide with fan 40mm ( idea from vortex_pr )
Dimensions :
120mm/160mm/80mm
Fully redrew, with stronger nut slots, nut holes a bit bigger.
Includ variants:
Fan 50mm, 60mm, 80mm.
Hotbed Mosfet extension.
Blind
CS = for Countersunk screw
To hold the Arduino Mega you don't need to use nut, but if you want use nut you will have to drill holes at 3.2mm. Only one screw should be enough.
Now fan should fit inside.
Screws M3 10-12mm countersunk ( better )
Previous version:
http://www.thingiverse.com/thing:863076
http://www.thingiverse.com/thing:831696
| Mega_XXL_size_4_Back_CS_v1.stl | 43.8KB | |
| Mega_XXL_size_4_Back_v1.stl | 34.5KB | |
| Mega_XXL_size_4_BlindLongSide_CS_v1.stl | 53.5KB | |
| Mega_XXL_size_4_BlindLongSide_v1.stl | 48.8KB | |
| Mega_XXL_size_4_BlindShortSide_CS_v1.stl | 29.6KB | |
| Mega_XXL_size_4_BlindShortSid_v1.stl | 20.2KB | |
| Mega_XXL_size_4_Bottom_CS_v1.stl | 483.5KB | |
| Mega_XXL_size_4_Bottom_v1.stl | 483.5KB | |
| Mega_XXL_size_4_Front_CS_v1.stl | 32.9KB | |
| Mega_XXL_size_4_Fron_v1.stl | 23.5KB | |
| Mega_XXL_size_4_Left_CS_v1.stl | 59.4KB | |
| Mega_XXL_size_4_Left_Mosfet_CS_v1.stl | 188.9KB | |
| Mega_XXL_size_4_Left_Mosfe_v1.stl | 184.2KB | |
| Mega_XXL_size_4_Left_v1.stl | 54.7KB | |
| Mega_XXL_size_4_LongSide_Fan_40_32_CS_v1.stl | 125.4KB | |
| Mega_XXL_size_4_LongSide_Fan_40_32_v1.stl | 117.0KB | |
| Mega_XXL_size_4_Right_CS_v1.stl | 59.4KB | |
| Mega_XXL_size_4_Right_v1.stl | 54.7KB | |
| Mega_XXL_size_4_Top_Blind_CS_v1.stl | 29.6KB | |
| Mega_XXL_size_4_Top_Blind_v1.stl | 20.2KB | |
| Mega_XXL_size_4_Top_Fan_50_40_CS_v1.stl | 61.6KB | |
| Mega_XXL_size_4_Top_Fan_50_40_v1.stl | 52.8KB | |
| Mega_XXL_size_4_Top_Fan_50_41_CS_v1.stl | 61.6KB | |
| Mega_XXL_size_4_Top_Fan_50_41_v1.stl | 52.8KB | |
| Mega_XXL_size_4_Top_Fan_60_50_CS_v1.stl | 62.8KB | |
| Mega_XXL_size_4_Top_Fan_60_50_v1.stl | 54.0KB | |
| Mega_XXL_size_4_Top_Fan_80_71.5_CS_v1.stl | 65.9KB | |
| Mega_XXL_size_4_Top_Fan_80_71.5_v1.stl | 56.5KB | |
| Mega_XXL_size_4_v1_all_parts.stl | 2.3MB | |
| MosfetLerdge.stl | 76.8KB |
