Case With Support For SainSmart 7 Inch TFT LCD 800*480 Touch Screen Display 3D Printer Model
The file 'Case With Support For SainSmart 7 Inch TFT LCD 800*480 Touch Screen Display 3D Printer Model' is (stl,fcstd) file type, size is 1.8MB.
The file 'Case With Support For SainSmart 7 Inch TFT LCD 800*480 Touch Screen Display 3D Printer Model' is (stl,fcstd) file type, size is 1.8MB.
A case with support/mount for that well-known resistive 7 inches touchscreen.
This is used for many projects, including screens for Raspberry pi (including RPI3). It has an HDMI input for the video and uses USB for power. Touchscreen control is operated by a separate cable connected to the raspberry pi 28/40 pin connector. The screen also has 4 button switches on one side.
This design allows fully functional button switches.
It features slots for inserting M3 nuts for extra strength. The two halves close using M3 x 20 mm (you need 4 nuts and 4 screws).
The side mount requires three M4 x 40 mm screws and three M4 nuts.
You can find the full FreeCAD source file attached.
If you want to modify the source, you need a recent FreeCAD development version. A v0.17 that supports B-Splines in the Sketcher.
| Attachment.stl | 79.5KB | |
| Bottom_refined.stl | 71.7KB | |
| Button_refined.stl | 123.1KB | |
| Hinge.stl | 369.0KB | |
| Screen_hinge.fcstd | 1.6MB | |
| Top_refined.stl | 117.0KB |
