Nice simple case for the USB-NeoHub by Olimex.
There are versions with and without a logo.
The two parts are a pretty tight fit and is probably a good friction-fit (depends on your settings and printer) but you can screw it together with 2 m3-screws (you can threat it by scrteweing in a m3-screw). You need 3 mm screws of minimal 10 mm.
If you have a Bambu-printer, see https://makerworld.com/en/models/245362 for ready to print profiles.
Happy 8-bitting;
| Neohub4_colorlogo.stl | 2.6MB | |
| Neohub4_Nologo.stl | 1.1MB |
