The file 'Case For The Full Graphic Smart LCD Controller With SDcard Access And Separate Button 3D Printer Model' is (zip,scad,stl) file type, size is 236.9KB.
This version is derived from wersy's case (http://www.thingiverse.com/thing:87250) with the addition of an sdcard access recess but unlike Srek's case (http://www.thingiverse.com/thing:195369) I choose to keep the origional separate button so I could print it in a different colour.
This is for the http://www.reprapdiscount.com/home/34-full-graphic-smart-lcd-controller.html and its clones
I fixed the issues with the button height in the graphics displays adapters currently available from aliexpress where the switch is a little too thick for the origional design. this is a parameter at the start of the.scad file that can be adjusted for your particular board.
The photos show a version printed in ABS and because I'm still tuning my setup for ABS its quiality is not as nice as the origional case I printed in PLA but I expect once I get abs tuned it will look better
| Case_for_the_Full_Graphic_Smart_LCD_Controller.zip | 175.6KB | |
| mods_for_display_case.scad | 4.1KB | |
| mods_for_display_case_back.stl | 389.3KB | |
| mods_for_display_case_button.stl | 242.5KB | |
| mods_for_display_case_front.stl | 326.8KB |
