As a guideline I had this very beautiful design of reprapdiscount:
http://www.thingiverse.com/thing:26093
But it was impossible for me to change it in a way to make it easily printable. So I decided to make my own version. But I wouldn't do it without using the excellent professional made little elastic kill button.
While I created this case I had neither the LDC board nor the LCD. So "Hardwarekiller" send me, very exactly, all the needed measurements by email - and everything's fit well.
| Bottom_Case_28_mm.stl | 274.5KB | |
| Bottom_Case_back_and_front_slots.stl | 266.7KB | |
| Bottom_Case_front_slots.stl | 265.5KB | |
| Case_Clamp.stl | 30.7KB | |
| controller_knob.stl | 46.6KB | |
| controller_knob_2.stl | 190.2KB | |
| controller_knob_6.4.stl | 56.7KB | |
| controller_knob_6.4_mod.stl | 78.9KB | |
| controller_knob_6.4_mod2.stl | 78.9KB | |
| kill_button_8.5_mm.stl | 68.6KB | |
| kill_button_8_mm.stl | 68.8KB | |
| mount_18_mm.stl | 50.6KB | |
| Top_Case_cut_out_97.4x40.4__.stl | 117.5KB | |
| Top_Case_cut_out_98.4x40.4.stl | 110.0KB |
