Case For Powerbank Mini – Built Using Dualshock 4 Battery 3D Printer Model
The file 'Case For Powerbank Mini – Built Using Dualshock 4 Battery 3D Printer Model' is (stl) file type, size is 395.4KB.
The file 'Case For Powerbank Mini – Built Using Dualshock 4 Battery 3D Printer Model' is (stl) file type, size is 395.4KB.
This is a case for a Mini Powerbank I built using a Sony Dualshock 4 battery and a T6845-C battery charging module. The DS4 Battery is quite small (only 1000 mAh) but you can fit 2 of them inside this case, for a total of 2000 mAh of capacity.
Can be ideal to power small devices like earbuds, smarthwatches and portable gaming consoles, It's super simple to build and assembly and have a small form factor, with just 8x4x2cm
The T6845-C batterey charging module I used: https://pt.aliexpress.com/item/1005006308949101.html
Print this in any PLA or ABS you want. Support is not required, however depending of your printer may be necessary use simple support on the case, to prevent the holes for USB ports to deform.
In files are two lid types, with and without text :)
| POWERBANK_MINI_CASE.stl | 119.0KB | |
| POWERBANK_MINI_LID_BLANK.stl | 6.1KB | |
| POWERBANK_MINI_LID_WITH_TEXT.stl | 1.0MB |
