The file 'Case For JYETECH 062 Digital Storage Oscilloscope 3D Printer Model' is (SLDPRT,STL) file type, size is 855.2KB.
For those who have the tiny DIY Oscilloscope JYETECH 062 here is a nice case for it.
You should print with support as shown (no need to clean as it will be out of sight). Before assembling 3 buttons should be removed, otherwise you won't be able to insert the PCB.
The problem with the original 062 DIY kit was that the length of the "distance bus screw thingy" (picture included) wasn't long enough. So the cover PCB pushed in some of the control buttons. I used this problem to my benefits (fixture).
I included the SolidWorks 2015 Student file, so anyone who would like to rebuild the model. Be my guest. It's a mess and should be rebuild after taking notes. I did a half rebuild the next day. If you would like to edit the model use the rebuild file. They are almost the same.
The inner measurements are now 108mm x 66mm. My PCBs size is 106,7mm x 64,7mm.
| Oscilloscope_part.SLDPRT | 561.3KB | |
| Oscilloscope_part.STL | 96.4KB | |
| Oscilloscope_part_rebuild_from_DWG.SLDPRT | 260.6KB | |
| Oscilloscope_part_rebuild_from_DWG.STL | 93.0KB |
