Protective case for this external Mosfet from AliExpress: https://www.aliexpress.com/item/1005004132861883.html?spm=a2g0o.order_list.order_list_main.5.322d1802LgYUSy
Helps keep the mosfet board safe whilst still keeping the heatsink exposed. Features holes to insert the cables through.
Optional: Snip any long component legs off on the bottom of the mosfet board before starting.
Base.stl and screw the mosfet board in to it using M3 screws. (It only fits one way)Top.stl and thread your cables through the dedicated holes.Top.stl into place, over the top of the mosfet board.Top.stl and Base.stl line up. If they don't, you have Top.stl on the wrong way around.Key.stl and slide them into the little holes on either side to lock the case pieces together.You can easily remove the keys later if you need to access the mosfet board again.
| Base.stl | 64.1KB | |
| Key.stl | 23.9KB | |
| Top.stl | 41.6KB |
