Case For DFR0580 Solar Power Manager For Lead Acid Battery With Fan 3D Printer Model
The file 'Case For DFR0580 Solar Power Manager For Lead Acid Battery With Fan 3D Printer Model' is (stl) file type, size is 60.1KB.
The file 'Case For DFR0580 Solar Power Manager For Lead Acid Battery With Fan 3D Printer Model' is (stl) file type, size is 60.1KB.
This is a case for the DFRobot DFR0580 Solar Power Manager for 12V Lead-Acid Batteries. It incorporates a standard 70mm box fan, but you can omit this for lower power projects. For my project, I am controlling the 12V fan with an XY-T01 thermostat controller with the thermal probe mounted directly to the large heatsink on the bottom of the DFR0580. The fan is a very old one I had sitting around and it has a non-standard thickness of 13.5mm, but this design will work with any fan thickness, just change the lengths of the screws. I'm using M3 x 80mm screws, and they protrude from the bottom of the case by a centimeter or so, acting as feet to keep the bottom grill from being blocked.
| Case_Bottom.stl | 159.4KB | |
| Case_Sides.stl | 73.9KB | |
| Fan_Guard.stl | 102.2KB |
