Case For DccExController || WiTcontroller – Remix 3D Printer Model
The file 'Case For DccExController || WiTcontroller – Remix 3D Printer Model' is (stl,STL) file type, size is 23.4MB.
The file 'Case For DccExController || WiTcontroller – Remix 3D Printer Model' is (stl,STL) file type, size is 23.4MB.
Remix from Case for DccExController || WiTcontroller
I use this Controller for DCC-EX Model Railroading
Remix for alternative parts
The names of the parts:
original - all sizes of the original parts
New: The ESP32 Lolin and the rotary encoders come from AZ Delivery / AliExpress, the switch is larger than the original, then I had it available.
Holder: the mounting for the rotary encoder without thread
To test the brackets, please first print the test_xxx.stl to determine the correct brackets.
It makes no sense to print complete housings without these tests, if you then cannot use them.
Models with short axes should be used for the rotary encoders, alternatively the axes can be shortened.
The ESP32 from AliExpress does not have a voltage divider to test the battery.
This can be easily retrofitted: Solder a 47k resistor from Battery Plus and Battery Minus to PIN 34.
The idea comes from ESP32 – Getting Battery charging level
I used 4x4 keyboards (also from AliExpress).
I also adapted the original files to the "new display" and my switch.
I used MeshMixer for the adjustments.
The files are not 100% OK, but they can be sliced with Cura and I printed different versions.
To avoid warping, I used Brim.
The Resolution for Cap and Rotary Knob: 0.1
Addition:
There are also rotary Encoder without a thread.
I have provided a new mounting for these rotary Encoder.
The frame for this mounting comes from PC volume control knob
| bottom_-_3x4_-_new_lolin32_-_new_switch.stl | 5.8MB | |
| bottom_-_3x4_-_new_lolin32_-_original_switch.stl | 3.5MB | |
| bottom_-_3x4_-_original_lolin32_-_new_switch.stl | 2.8MB | |
| bottom_-_3x4_-_original_parts.stl | 522.5KB | |
| bottom_-_4x4_-_new_lolin32_-_new_switch.stl | 4.3MB | |
| bottom_-_4x4_-_new_lolin32_-_original_switch.stl | 4.6MB | |
| bottom_-_4x4_-_original_lolin32_-_new_switch.stl | 4.3MB | |
| bottom_-_4x4_-_original_parts.stl | 3.2MB | |
| cap.stl | 10.0MB | |
| cap_weight.stl | 492.3KB | |
| inner_frame.stl | 553.1KB | |
| lightfilter.STL | 2.2KB | |
| rotary_flat_axis.stl | 1.2MB | |
| rotary_flat_axis_reduced_inner_height.stl | 1.2MB | |
| rotary_round_axis.STL | 555.8KB | |
| rotary_round_axis_reduced_inner_height.stl | 584.8KB | |
| test_-_new_display.stl | 325.2KB | |
| test_-_new_lolin32.stl | 2.1MB | |
| test_-_new_switch.stl | 136.1KB | |
| test_-_original_display.stl | 81.7KB | |
| test_-_original_lolin32.stl | 700.8KB | |
| test_-_original_switch.stl | 47.0KB | |
| top_-_3x4_-_new_display.stl | 728.5KB | |
| top_-_3x4_-_new_display_-_holder.stl | 6.6MB | |
| top_-_3x4_-_original_display.stl | 460.6KB | |
| top_-_3x4_-_original_display_-_holder.stl | 6.6MB | |
| top_-_4x4_-_new_display.stl | 1.1MB | |
| top_-_4x4_-_new_display_-_holder.stl | 6.9MB | |
| top_-_4x4_-_original_display.stl | 997.4KB | |
| top_-_4x4_-_original_display_-_holder.stl | 6.8MB |
