Case For ADX HF Radio By WB2CBA 3D Printer Model
The file 'Case For ADX HF Radio By WB2CBA 3D Printer Model' is (step,stl) file type, size is 1.7MB.
The file 'Case For ADX HF Radio By WB2CBA 3D Printer Model' is (step,stl) file type, size is 1.7MB.
This is a case for the WB2CBA ADX kit radio. (And now includes a LPF Filter case)
More info on the ADX kit radio can be found here:
https://github.com/WB2CBA/ADX
and here:
https://github.com/VK2ARH/Cowtown-ADX-Project <- (this is the actual one I built)
Updated: 02July2024 - Added V3 of the case that has larger holes for the Audio connectors. Still uses same LPF slide (v2)
Updated: 04July2024 - Added V4 of the case that has larger holes for the Audio connectors and a modified Antenna connector hole to accommodate either BNC or SMA. Still uses same LPF slide (v2)
Updated: 29Aug2024 - Added a case for storing LPF's. I wanted a case for my LPF's as I don't use the 3 onboard LPF holders. The filters fit quite snugly so you may need to scale if they are too tight. The scale presented is what I found to work for mine and they do not rattle around in the case very much. The lid may need a little light sanding for a smooth fit.
| ADX_Case_Main_V2.step | 471.8KB | |
| ADX_Case_Slide_V2.step | 225.8KB | |
| ADX_Case_v2.stl | 1.2MB | |
| ADX_Case_V3_Larger_Audio_Holes.stl | 1.2MB | |
| ADX_Case_V4_Larger_Audio_Holes_ComboAntenna.step | 779.1KB | |
| ADX_Case_V4_Larger_Audio_Holes_ComboAntenna.stl | 1.4MB | |
| ADX_LPF_CaseSlide_v2.stl | 1012.4KB | |
| LPF_Case_Lid_v1.stl | 444.2KB | |
| LPF_Case_v1.stl | 259.1KB |
