These character trackers use 12mm D6 to track your Life, Will, and Command points. I've hopefully included enough slots. These would sit with each character card for tracking.

I've made ones for each major faction, as well as some generic ones. These can be tricky to print. On my Bambu P1P, I enable "Detect Thin Walls" under the default profile for 0.08mm prints. I can print everything properly except for the Mask, which has intricate details. Someone on resin or with a smaller nozzle size could probably do it.

Pay attention in your slicer to see if it warns you about anything not showing up in the final print. If you're having troubles, you could try scaling it upward so the resolution of the details isn't so tough, but this will create larger holes for the dice. I'd try 130% scaling so you can fit 16mm dice (that will make the holes about 17mm).

The EZ Print has no lettering--this is meant for newer people who don't want to futz with settings too much. Should print no issues on anything. I suppose you could paint the squares the correct colors for what they're tracking, thus removing the need for the lettering.

This should also be easy to use to spin off your own variants for any given game.

Enjoy!