CarMotion Quick-n-Dirty Test Track Expansion 3D Printer Model
The file 'CarMotion Quick-n-Dirty Test Track Expansion 3D Printer Model' is (stl) file type, size is 175.4KB.
The file 'CarMotion Quick-n-Dirty Test Track Expansion 3D Printer Model' is (stl) file type, size is 175.4KB.
This is an expansion for the quick demonstration track I created for the Viessmann CarMotion system. Components were designed in Fusion360 are intended for FDM printers. Connections between the track elements are made via bolted joints using heat-set threaded inserts. The center grove is designed for Viessmann 8430 magnetic tape (3x1mm). Viessmann 8429 magnetic tape (3x0.5mm) should be compatible but has not been tested. The three-way turn out is manually driven.
Fasteners -- M3 - 0.5x10mm (DIN912)
Inserts -- RX-M3x5.7
Note -- the counter bored thru-holes in the track segments are deliberately undersized as a retention feature.
| CarMotion_Test_Track_v12_100mm_MagHoles.stl | 67.9KB | |
| CarMotion_Test_Track_v12_200mm_MagHoles.stl | 96.0KB | |
| CarMotion_Test_Track_v12_200mm_NoHoles.stl | 39.7KB | |
| CarMotion_Test_Track_v12_Appendix.stl | 88.8KB | |
| CarMotion_Test_Track_v12_Custom_Bend_90.stl | 61.8KB | |
| CarMotion_Test_Track_v12_FourWay_corrected.stl | 81.1KB | |
| CarMotion_Test_Track_v12_Loop_180.stl | 81.1KB | |
| CarMotion_Test_Track_v12_Squirrely_Bend.stl | 60.8KB | |
| CarMotion_Test_Track_v12_Tee_Section.stl | 85.6KB | |
| CarMotion_Test_Track_v12_Turn.stl | 28.2KB | |
| CarMotion_Test_Track_v12_Turnout.stl | 112.7KB | |
| CarMotion_Test_Track_v12_ViaDuct1.stl | 46.8KB | |
| CarMotion_Test_Track_v12_ViaDuct2.stl | 51.3KB |
