UPDATE: A newer version of this project is available here https://www.thingiverse.com/thing:4233353
Hi everyone!
this is my last project, a fully arduino based, suspensioned 1:18 rc car.
If you like this project ad want daily news on upgrades, videos of the car and other projects, follow me on IG: engineli_3d
-This car is powered by a 1000 KV a2212 BL motor, sold with ESC for around 10 euros
-1 SG90 servo
-I used four 8x12x3.5 mm bearing (few euros)
-2 arduino nano and 2 NRF24L01 wifi modules (i spent like 7 euros on aliexpress)
-2 arduino joystick modules
-I Used a homemade 2 Li-ion cells 18650 battery (from an old laptop battery)
-all screws are M3, most of them are M3x10 and some are longer, like the ones in the wheels, for the arduino mount, and front arm suspensions (M3x25)
-tyres are from a Wltoys A959
This is a work in progress, i will design a new, more conventional transmitter (with steering wheel and throttle trigger) and an aesthethic truggy style rollbar.
| arduino_mount.stl | 218.8KB | |
| chassis.stl | 356.8KB | |
| controller.stl | 512.4KB | |
| controller_top.stl | 365.1KB | |
| crown_gear.stl | 147.1KB | |
| front_wheel_2x.stl | 493.6KB | |
| front_wheel_stop_2x.stl | 120.4KB | |
| hub_front_left.stl | 454.3KB | |
| hub_front_right.stl | 454.3KB | |
| hub_mount_front_left.stl | 176.8KB | |
| hub_mount_front_right.stl | 180.9KB | |
| hub_rear_2x.stl | 422.0KB | |
| pinion_gear.stl | 132.2KB | |
| rear_shaft.stl | 101.3KB | |
| rear_wheel_2x.stl | 486.9KB | |
| receiver_CARduino.ino | 2.1KB | |
| servo_arm.stl | 41.0KB | |
| steering_link_2x.stl | 35.0KB | |
| suspension_arm_left.stl | 118.2KB | |
| suspension_arm_right.stl | 118.2KB | |
| suspension_base_rear.stl | 201.9KB | |
| suspension_rear.stl | 234.8KB | |
| suspension_upper_arm_2x.stl | 46.4KB | |
| transmitter_CARduino.ino | 1.2KB |
