This is my new design for cutting carbon tube tool with a Dremel Multi395/3950. It designed to cut carbon tube from 10 to 40 OD and max 2 mm thickness , that is very useful for model maker. In order to complete this project, you need to have
Also, of course you need a Dremel Multi395/3950 with a OD 60mm cutting disc. This time I prepared the metal parts for people who needs or if you don't want to print yourself, you can order to me via email : [email protected] .
https://www.facebook.com/ricky.cheung.94043/videos/1030018230353842/
https://www.facebook.com/ricky.cheung.94043/videos/1033049330050732/
Additional dusts collector parts was added. I use a common vacuum cleaner with a hose diameter from 31 to 35. No more mess around when cutting. The main body did revised but if you don't want to print again, just use some tape cover the openings inside. Also, you need to cut a hole with 20 diameter on the 28mm tube and 120mm from end of the tube. In order to suck the dusts out. Above are the videos on Facebook I put, if you are interested, go there to have a look.
DISCLAIMER
Please be informed that the Carbon Fiber Dust is highly toxic to everyone. And breathing it without proper respiratory protection is at risk. Please take good care yourself when cutting the carbon tubes.
Thank you for your download!
| 4_cuterBody_07.STL | 129.0KB | |
| 4_cutterCover_00.STL | 19.2KB | |
| 4_cutterCover_28_04.STL | 44.8KB | |
| 4_dustCollector_28_01.STL | 20.9KB | |
| 4_dustExTube_28_00.STL | 35.2KB | |
| 4_pressHolder_03.STL | 48.5KB | |
| 4_pressHousing_05.STL | 94.4KB | |
| 4_rodEndCap_28_00.STL | 40.9KB | |
| 4_screwPlate_00.STL | 208.3KB | |
| 4_tubeStopperLock_06.STL | 31.1KB | |
| 4_tubeStopper_02.STL | 54.6KB | |
| 4_tubeStopper_28_01.STL | 56.9KB | |
| video_link_01.txt | 70.0B |
