Caravan Gift Box 3D Printer Model
The file 'Caravan Gift Box 3D Printer Model' is (stl) file type, size is 7.3MB.
The file 'Caravan Gift Box 3D Printer Model' is (stl) file type, size is 7.3MB.
I made this little gift box for a caravan enthusiast.
The small parts were printed on a „Ultimaker 2” with a 0.25mm nozzle.
I used clear abs filament and and gave them a short acetone bath.
Then I painted everything with acrylic paint.
Box footprint: 10x10cm
„Box cover 1x.stl"
„Box bottom 1x.stl“----0.8mm Nozzle, 0.4mm Layer, 55mm/s Speed, no infill, no Support
“all small parts”---------0.25 Nozzle,0.07 Layer, 25mm/s Speed, no infill, no support
If you have any questions or need further information, feel free to contact me.
Gerne auch auf Deutsch :-)
| --all_together--.stl | 18.1MB | |
| Bird_3x.stl | 3.1MB | |
| Box_bottom_1x.stl | 54.6KB | |
| Box_cover_1x.stl | 18.2KB | |
| Caravan_1x.stl | 1.5MB | |
| Caravan_prop_3x.stl | 78.0KB | |
| Chair_2x.stl | 374.2KB | |
| Door_1x.stl | 123.5KB | |
| Flower_6x.stl | 349.9KB | |
| Meadow_1x.stl | 1.1MB | |
| Plate2x.stl | 588.5KB | |
| Table_1x.stl | 101.1KB | |
| Wheel_2x.stl | 1.5MB | |
| Window_2x.stl | 42.1KB |
