This is a remix of Car Headrest Bag Hook - https://www.thingiverse.com/thing:5519951 by Jsreb. This headrest bag hook was designed for a 2019 Acura RDX and will work with any car with headrest posts 150mm apart and 14mm in diameter. Confirmed to work with all 3rd gen RDXs (2019-Present)
Somethings I changed were adding two arms, increased the hook height and rounding the sides. I'm not sure where it was warping on the original design but I was thinking it might be where it clips on the headrest. So I made it so you have to slide it on. I also made the hooks stronger by making them sperate. Allowing them to be printed horizontal. You will need to glue the hooks onto the bracket. I used JBL plastic bonder but you can use whatever you like.
Having two hooks will allow you to use both loops of a bag on both arms of the hook. It is capable of holding a bag with just one hook.
To install you will need to pull the headrest all the way out. Slide it on and put the headrest back on.
| Bracket_v1.stl | 289.3KB | |
| Hook_v1.stl | 363.4KB |
