Captain’s Lantern 3D Printer Model
The file 'Captain’s Lantern 3D Printer Model' is (stl) file type, size is 91.0KB.
The file 'Captain’s Lantern 3D Printer Model' is (stl) file type, size is 91.0KB.
Here are the files for my Captian's lantern
I modelled these in parts to avoid the need for any supports,
you will need:-
1 x Top 6 x Frames (these lay flat on the bed) 1 x Base 1 x Standnone need any supports.
then:-
1 x Lens (this should be printed in vase mode in something niceand transparent to look like glass.)
you can then glue the base onto the stand, the frames slot into the base, drop in the lens and pop on the top.
I opted to glue the frames together and into the base so I could remove the top without concern.
this will give plenty of space to fit led candles inside or even some neopixels if you are looking for more colour options or some flicker.
I had fun with this one and hope you enjoy them
thanks
Bugman
| Base.stl | 12.8KB | |
| Frame_-_6_x_required.stl | 6.9KB | |
| Lens_-_Vase_mode_this.stl | 1.1KB | |
| Stand.stl | 105.7KB | |
| Top.stl | 145.2KB |
